C 60 -Xantrex


Specifications 

Model C35 C40 C60
Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC
Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC
Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous
Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC
(100% continuous duty cycle),
#6 AWG (90 °C rated)
General Specifications
Maximum Peak Current 85 amps intermittently-electronically protected
Maximum Voltage Drop 0.30 volts -charge control mode
Total Current Consumption While operating - 15 ma (typical), at idle - 3 ma (tare)
Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM).
Regulation Adjustment Settings Charge Control Mode Setup for:
Lead Acid Battery 12 Volt Configuration:
Float 12.5 - 14.5 VDC
Bulk 13.0 - 15.0 VDC
EQ +1 VDC above Bulk
24 Volt Configuration:
Float 25.0 - 29.0 VDC
Bulk 26.0 - 30.0 VDC
EQ +2 VDC above Bulk
48 Volt Configuration:
Float 50.0 - 58.0 VDC
Bulk 52.0 - 60.0 VDC
EQ +4 VDC above Bulk
NiCad Type Battery
(VDC above adjustment setting)
Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC)
Load Control Mode
Low Voltage Reconnect (LVR) - Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting.

Low Voltage Disconnect (LVD) - Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting.
Standard Features
Status Indicator Multicolor LED indicates the operating/battery voltage status
Low Voltage disconnect
(Load Control Mode)
User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a "grace" period.
Equalization Charge
(Charge Control Mode)
User selectable manual or automatic equalization (every 30 days)
Short Circuit Protection Fully electronically protected with auto-reset
Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected)
Options
LCD Meter Panel
(CM, CMR/25 CMR/50, CMR/100)
Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25' (7.5 m) of cable. CMR/50 includes 50' (15 m) of cable, CMR/100 includes 100' (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. SOLD SEPARATELY.
External Battery Temperature Sensor Provides automatic adjustment of the charge control setpoints to the battery temperature. SOLD SEPARATELY.
Physical
Enclosure Type Indoor, ventilated, powder-coated steel with 3/4" and 1" knockouts
Specified Temperature Range 32 to 104 °F (0 to +40 °C)
Allowed Temperature Range -67 to 167 °F (-55 to +75 °C)
Altitude Limit (operating) 15,000 feet (5,000 meters)
Altitude Limit (non-operating) 50,000 feet (16,000 meters)
Dimensions (H x W x D) C35: 8" x 5" x 2.5" (20.3 cm x 12.7 cm x 6.35 cm)
C40, C60: 10" x 5" x 2.5" (25.4 cm x 12.7 cm x 6.35 cm)
Mounting Vertical Wall Mount
Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg)
Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg)
Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant,
Designed to CTIK Standards.
Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials.