SR-MT2410 ( MPPT )


Product Features :

  • Adopting double crest or multi crest tracing technique, used for the condition when a part of solar panel is under shadow or parts of solar panel is damage.
  • Built-in maximum power point tracking algorithm which could promote the energy utilization efficiency of pv system. The charging efficiency is 15%~20% higher than PWM mode.
  • It can find out the best working point of I-V curve within 1 minute. the MPPT efficiency could reach to 99.9%.
  •  Adopting advanced digital power supply techniques which makes the energy conversion efficiency reach up to 97%.
  •  Four charging stages: MPPT - equalizing charge- boosting charge- floating charge.
  • With current-limiting charging mode. When the power of solar panel is oversized? the controller will lower charging power automatically, which enable the system to work under the rated charging current. 
  • Have the fault code indication, it helps user confirm the system fault.
  • Various load control methods. Could recognize day and night automatically.
  • Various system protection functions. Including over-charge, over-discharge, over-load, over-heat, battery-reverse connection and short-circuit protection etc.

Technical Parameters :

Parameters

Value

Model

MT2410

System voltage

12V

 

Max. input power of solar panel

130W

 

Transfer efficiency

≤96%

 

Rated charge/ discharge current

10A

No load loss

?15mA

Max. input voltage of solar panel

?150V

MPPT tracing efficiency

?99%

Over voltage protection

16.5V

 

Limited charge voltage

15.5V

 

Equalizing charge voltage

15.2V

 

Equalizing charge interval

30 days

Boosting charge voltage

14.4V

 

Floating charge voltage

13.8V

 

Over-discharge recover voltage

12.5V

 

Over discharge voltage

11.0V

 

Boosting charge time

2 hours

Equalizing charge time

1 hour

Over temperature protection

Yes

Light-operated voltage (on)

5V

Light-operated voltage (off)

6V

Light-operated delay time

5min

Working temperature

-35??+65??

Weight

430g

Altitude

≤3000m

Dimension

143*71*37.4 (mm)

Installation dimension

139*48(mm)

Overload protection

Load current≥1.25 times rated current, cut off the load within 10 seconds;  

Load current≥1.5 times rated current, cut off the load within 5 seconds

Protections

1.Reverse connection. 2.Inner over temperature. 3.The voltage of PV input

terminal is over value. 4. Over load  5.Reverse charging protection at night.

6. TVS lightning protection 7. Waterproof: IP 64